DREAM 40 AC

DREAM 40 AC FRONT LARGE
DREAM 40 AC FRONT LARGE
DREAM 40 AC Channel-Closeup
DREAM 40 AC Hybridmaster

4 iconic British AC voicings

Inspired by our very own British Dream MKII, the Dream 40 AC takes four classic AC voices and packs them into this single channel amplifier. New features include; Tube or Solid State Rectification (selectable via the Standby Switch), and our popular Citizen Loop (tube buffered/pedal optimized effects loop).

Channel Strip Close Up
Four different vintage AC preamp voices plus a mid boost/cut switch are provided, including Normal, Brilliance, Top Boost 1 and Top Boost 2—even a Top Cut control is on hand to fine-tune your tone. With this amplifier’s extended headroom, you’ll love how it stays clean even when you take the volume knob past Noon.

Tube or Solid- State Rectification
For the ultimate experience in the “feel” department, the British Dream MKII gives you two rectifier options that are controlled via toggle switch. Choose between a tube rectifier (classic vintage power supply sag) or a solid-state rectifier (efficient, clear and punchy) and easily toggle between whichever you prefer.

HybridMASTER™ Volume Control
HybridMASTER™ and the Venue Switch are located on the front panel giving you the confidence to play what you feel when you feel it at exactly the volume you need for the occasion. Think of the Venue Switch as a “macro” volume adjustment – choose between full volume (Stage Mode) or an 70% volume reduction (Studio Mode) – and the HybridMASTER knob as a “micro” volume adjustment allowing you to fine tune your output levels. Our patented HybridMASTER is volume management executed to perfection.

Model Name: Dream 40 AC
Power: Class AB, 40 Watts (tube rectified), ~50 Watts (solid state rectified)
Power Tubes: Mullard Reissue EL34 x 2 as standard
Preamp Tubes: V1: JJ Electronics EF806. V2 – V3: JJ Electronics ECC83S, V4: Sovtek 12AX7 LPS
Channel Controls: Volume, AC Voicing Switch, Top Cut and Mid Contour (boost/cut) switch
Other Controls and Features: Stage/Studio Output Mode Switch (Stage Mode = 100% output, Studio Mode = 30% output), HybridMASTER™ Level Control for Fine Tuning Output Level, Citizen Loop (tube buffered pedal optimized FX loop from the Dual Citizen model)
Weight: Head (23 lbs.), 112 Combo (55 lbs.)
Case Composition: 5/8″ Birch
Speaker Outputs: 1 x 16, 1 x 8 and 1 x 4 Ohm Speaker Outputs
Dimensions: 18″ x 10″ x 9.33″
Operating Voltage: 120V is standard. Export 240V and other mains voltages are available
Standby Switch Features: Middle Position: Standby Mode, Up Position: Solid State Rectifier, Down Position: Tube Rectifier
Certification: CE Certified

FOUR COMPREHENSIVE AC TONES

 

3rd Power’s DREAM 40 AC amplifier takes the comprehensive AC channel of our British Dream MKII and packs it all into a smart, streamlined package. You’ll be amazed by DREAM 40 AC’s crisp performance with superior precision, consistency and beauty.

 

• Preamp features an EF86 pentode tube
• 4 comprehensive AC voices including Top Boost
• Selectable mid boost/contour EQ modes
• Patented HybridMASTER™ volume management
• Switchable Tube & Solid-State Rectifier Modes
• Tube Buffered, Pedal Optimized Series FX Loop
• Illuminating backlit logo
• 2 x EL34 power tubes, ~40W
• Head or 112 Combo Versions
• 16, 8 and 4 ohm speaker outputs

4 iconic British AC voicings

Inspired by our very own British Dream MKII, the Dream 40 AC takes four classic AC voices and packs them into this single channel amplifier. New features include; Tube or Solid State Rectification (selectable via the Standby Switch), and our popular Citizen Loop (tube buffered/pedal optimized effects loop).

Channel Strip Close Up
Four different vintage AC preamp voices plus a mid boost/cut switch are provided, including Normal, Brilliance, Top Boost 1 and Top Boost 2—even a Top Cut control is on hand to fine-tune your tone. With this amplifier’s extended headroom, you’ll love how it stays clean even when you take the volume knob past Noon.

Tube Rectification
To really capture the feel of an early 60’s AC, we built in a rectifier tube socket loaded with a GZ34 tube rectifier for a vintage “tube sag” that adds just the right amount of compression and bounce to your sound.

HybridMASTER™ Volume Control
HybridMASTER™ and the Venue Switch are located on the front panel giving you the confidence to play what you feel when you feel it at exactly the volume you need for the occasion. Think of the Venue Switch as a “macro” volume adjustment – choose between full volume (Stage Mode) or an 80% volume reduction (Studio Mode) – and the HybridMASTER knob as a “micro” volume adjustment allowing you to fine tune your output levels. Our patented HybridMASTER is volume management executed to perfection.

Model Name: Dream 40 AC
Power: Class AB, 40 Watts (tube rectified), ~50 Watts (solid state rectified)
Power Tubes: Mullard Reissue EL34 x 2 as standard
Preamp Tubes: V1: JJ Electronics EF806. V2 – V3: JJ Electronics ECC83S, V4: Sovtek 12AX7 LPS
Channel Controls: Volume, AC Voicing Switch, Top Cut and Mid Contour (boost/cut) switch
Other Controls and Features: Stage/Studio Output Mode Switch (Stage Mode = 100% output, Studio Mode = 30% output), HybridMASTER™ Level Control for Fine Tuning Output Level, Citizen Loop (tube buffered pedal optimized FX loop from the Dual Citizen model)
Weight: Head (23 lbs.), 112 Combo (55 lbs.)
Case Composition: 5/8″ Birch
Speaker Outputs: 1 x 16, 1 x 8 and 1 x 4 Ohm Speaker Outputs
Dimensions: 18″ x 10″ x 9.33″
Operating Voltage: 120V is standard. Export 240V and other mains voltages are available
Standby Switch Features: Middle Position: Standby Mode, Up Position: Solid State Rectifier, Down Position: Tube Rectifier
Certification: CE Certified

1307 Jewel Street
Nashville, TN 37207
615-945-3393
[email protected]

© 2016 3rd Power Amplification LLC. All Rights Reserved.