NEW! DC-212 Speaker Cab (MONO/STEREO) Description The design goal for the DC212 was to enhance the performance and versatility of our legendary Dream 212 cab. I've been on a kick lately of trying to optimize/align the timing of when your guitar frequencies hit and then exit the speaker and that lead me to a particular design decision to move the back baffle forward by roughly 1.25".  This means the DC-212 is a cabinet with a depth of 12-5/8" compared to the Dream 212 which had a depth of 14".  This makes the response more immediate.  When play testing and recording, I find the mid and high frequencies line up better with the lows to produced a supremely focused tone that is crystal clear, articulate and responsive.  Every pick attack of your playing is spot-on accurate.  The low frequencies remain full and focused but don't take over the performance. Vertical and Horizontal orientation is standard with the new DC-212.  Dimensionally, the DC-212 fits perfectly to the head enclosure shape of the Extra Spanky 6VEL, Spanky MKII+ as well as the forthcoming new versions of the Clean and Dirty Sink heads.  This time around, we went with a classic look meaning that your rig will accompany you on stage with superior tone without taking up too much room or dominating the smooth sight-lines on today's modern stage designs. Patented Design Crafted from 5/8" birch, the DC-212 features embedded triangular speaker chambers to eliminate standing waves and internal reflections. With construction features including isolated speaker chambers (one open, one closed) and a tuned triangle port, the DC-212 delivers your full frequency response with a clarity and punch that sounds more like a mastered record and won't get lost in the mix. Pricing *Prices start at $1499 USD loaded with 2x WGS Retro 30 speakers. WARNING: Cancer and Reproductive Harm http://www.p65warnings.ca.gov Mono and Stereo Operating Modes Mono or Stereo Operating Modes The DC-212 provides a ton of flexibility by way of MONO or STEREO operating modes. When you plug into the left speaker jack, both speakers are linked in mono (total 8 ohm load). When you plug into the right speaker jack you break the link and can now operate each speaker individually for stereo operation (each speaker is 16 ohms). Specifications Model Name: DC-212 Power Handling: ~120w loaded with a pair of WGS Retro 30 as standard. Weight: 55 lbs loaded (36 lbs unloaded) Dimensions (WxHxD): 29-7/8” x 20” x 12-5/8” Construction: 5/8" birch enclosure, dado joinery throughout Impedance: 8 ohms mono, 16 ohms when operating in stereo mode REFINED TONE, FRONT AND CENTER   The DC-212 is a dual-chambered true stereo 212 speaker cabinet designed to deliver a full-bodied frequency response that is well defined and in control throughout the frequency spectrum of your guitar tone. With its patented design, the DC-212 is the perfect choice when you want your sound to translate in the mix with authority.   • Patented – Two internal Tri-cab™ speaker chambers eliminate standing waves • 8-ohm Mono or 16-ohm Stereo operation • 5/8" baltic birch enclosure construction • Closed-back on one chamber, open-back on the other • Horizontal & Vertical Orientation Available • Loaded with 2x WGS Retro 30 Speakers {{ vc_btn: title=Purchase+Info&style=flat&color=warning&align=center&link=url%3Ahttps%253A%252F%252F3rdpower.com%252Fproduct%252Fdc-212%252F%7Ctitle%3ADC-212%2520SPEAKER%2520CABINET }} Description The design goal for the DC212 was to enhance the performance and versatility of our legendary Dream 212 cab. I've been on a kick lately of trying to optimize/align the timing of when your guitar frequencies hit and then exit the speaker and that lead me to a particular design decision to move the back baffle forward by roughly 1.25".  This means the DC-212 is a cabinet with a depth of 12-5/8" compared to the Dream 212 which had a depth of 14".  This makes the response more immediate.  When play testing and recording, I find the mid and high frequencies line up better with the lows to produced a supremely focused tone that is crystal clear, articulate and responsive.  Every pick attack of your playing is spot-on accurate.  The low frequencies remain full and focused but don't take over the performance. Vertical and Horizontal orientation is standard with the new DC-212.  Dimensionally, the DC-212 fits perfectly to the head enclosure shape of the Extra Spanky 6VEL, Spanky MKII+ as well as the forthcoming new versions of the Clean and Dirty Sink heads.  This time around, we went with a classic look meaning that your rig will accompany you on stage with superior tone without taking up too much room or dominating the smooth sight-lines on today's modern stage designs. Patented Design Crafted from 5/8" birch, the DC-212 features embedded triangular speaker chambers to eliminate standing waves and internal reflections. With construction features including isolated speaker chambers (one open, one closed) and a tuned triangle port, the DC-212 delivers your full frequency response with a clarity and punch that sounds more like a mastered record and won't get lost in the mix. Pricing *Prices start at $1399 loaded with 2x WGS Retro 30 speakers. *All prices are USD WARNING: Cancer and Reproductive Harm http://www.p65warnings.ca.gov Mono and Stereo Operating Modes Mono or Stereo Operating Modes The DC-212 provides a ton of flexibility by way of MONO or STEREO operating modes. When you plug into the left speaker jack, both speakers are linked in mono (total 8 ohm load). When you plug into the right speaker jack you break the link and can now operate each speaker individually for stereo operation (each speaker is 16 ohms). Specifications Model Name: DC-212 Power Handling: ~120w loaded with a pair of WGS Retro 30 as standard. Weight: 55 lbs loaded (36 lbs unloaded) Dimensions (WxHxD): 29-7/8” x 20” x 12-5/8” Construction: 5/8" birch enclosure, dado joinery throughout Impedance: 8 ohms mono, 16 ohms when operating in stereo mode 1307 Jewel Street Nashville, TN 37207 615-945-3393 [email protected] © 2024 3rd Power Amplification LLC. All Rights Reserved.

DREAM SERIES 112 Refined Tone With An Extra Kick The design goal for the DS112 was to capture the enormous spirit and sonic footprint of its' big brother, the DS212 cab, but pack it all into a convenient 112 package. Well, we nailed it. Patented Design Crafted from 5/8" birch, the DREAM SERIES 112's features our proprietary internal deflection panel to minimize standing waves and internal reflections. With construction features including increased cubic volume and a tuned triangle port, the DS112 delivers your full frequency response with a detail and punch that sounds more like a mastered record and won't get lost in the mix. *All prices are USD WARNING: Cancer and Reproductive Harm http://www.p65warnings.ca.gov Extended Low Frequency Response Extended Internal Dimensions With an internal area of 1.94 cuFT, the new DS112 boasts a 35% increase in total cubic volume compared to our original SB112 cabinet. That translates into a noticeably huge sound. Triangle Ported Back Panel To refine the tuning of the cabinet, we brought back our triangle ported back panel. We experimented with size and port placement until we got exactly the response we were looking for. The frequency response is extended just right: balanced when on the bridge position pickup, and with a noticeable punch and kick when on the neck position. Specifications Model Name: DS112 Power Handling: ~60w loaded with a WGS Retro 30 as standard. Celestion Vintage 30 or other speakers available upon request (please note 2 weeks increased lead time for speaker procurement). Weight: 39 lbs loaded (~30 lbs unloaded) Dimensions: 25” x 20.75 x 11” Construction: 5/8" birch enclosure, 1/2" birch internal chamber Impedance: 8 ohms 3rd Power’s DREAM SERIES speaker cabinets are sonically and visually refined. They deliver a full-bodied frequency response that is well defined and in control throughout the frequency spectrum of your guitar tone. With its patented design, the DREAM SERIES 112 is the perfect choice when you want your sound to translate in the mix with authority.   • Proprietary internal deflection panel minimizes standing waves • 8-ohm Mono operation is typical when loaded with a speaker • 5/8″ baltic birch enclosure construction • Tuned triangle port for extended frequency response • Loaded with a WGS Retro 30 as standard Note: No longer available. Refined Tone With An Extra Kick The design goal for the DS112 was to capture the enormous spirit and sonic footprint of its' big brother, the DS212 cab, but pack it all into a convenient 112 package. Well, we nailed it. Patented Design Crafted from 5/8" birch, the DREAM SERIES 112's features our proprietary internal deflection panel to minimize standing waves and internal reflections. With construction features including increased cubic volume and a tuned triangle port, the DS112 delivers your full frequency response with a detail and punch that sounds more like a mastered record and won't get lost in the mix. *All prices are USD WARNING: Cancer and Reproductive Harm http://www.p65warnings.ca.gov Extended Low Frequency Response Extended Internal Dimensions With an internal area of 1.94 cuFT, the new DS112 boasts a 35% increase in total cubic volume compared to our original SB112 cabinet. That translates into a noticeably huge sound. Triangle Ported Back Panel To refine the tuning of the cabinet, we brought back our triangle ported back panel. We experimented with size and port placement until we got exactly the response we were looking for. The frequency response is extended just right: balanced when on the bridge position pickup, and with a noticeable punch and kick when on the neck position. Specifications Model Name: DS112 Power Handling: ~60w loaded with a WGS Retro 30 as standard. Celestion Vintage 30 or other speakers available upon request (please note 2 weeks increased lead time for speaker procurement). Weight: 39 lbs loaded (~30 lbs unloaded) Dimensions: 25” x 20.75 x 11” Construction: 5/8" birch enclosure, 1/2" birch internal chamber Impedance: 8 ohms 1307 Jewel Street Nashville, TN 37207 615-945-3393 [email protected] © 2021 3rd Power Amplification LLC. All Rights Reserved.

DREAM SERIES 212XD (MONO/STEREO) Refined Tone With An Extra Kick The design goal for the DS212 was to capture the enormous spirit and sonic footprint of our original SB212 cab while packing it into a more streamlined enclosure. Well, we nailed it. Patented Design Crafted from 5/8" birch, the DREAM SERIES 212 features embedded triangular speaker chambers to eliminate standing waves and internal reflections. With construction features including isolated speaker chambers (one open, one closed) and a tuned triangle port, the DS212 delivers your full frequency response with a detail and punch that sounds more like a mastered record and won't get lost in the mix. *All prices are USD WARNING: Cancer and Reproductive Harm http://www.p65warnings.ca.gov Mono and Stereo Operating Modes Mono or Stereo Operating Modes The DS212 provides a ton of flexibility by way of MONO or STEREO operating modes. When you plug into the left speaker jack, both speakers are linked in mono (total 8 ohm load). When you plug into the right speaker jack you break the link and can now operate each speaker individually for stereo operation (each speaker is 16 ohms). Extended Low Frequency Response Extended Internal Dimensions With a combined internal area of ~3 cuFT, the new 14" deep DS212XD really packs a punch. That translates into an undeniably huge sound. Triangle Ported Back Panel To refine the overall performance of the cab, we brought back our open back/closed back design. This gives you the best of both worlds: punchy closed-back and a chimey open-back tones at the same time. The frequency response is extended just right: balanced when on the bridge position pickup, and with a deep punch and kick to it when in the neck position. Specifications Model Name: DS212 Power Handling: ~120w loaded with a pair of WGS Retro 30 as standard. Celestion Vintage 30 or other speakers available upon request (please note 2 weeks increased lead time for speaker procurement). Weight: 57 lbs loaded (38 lbs unloaded) Dimensions: 27.75” x 20.75” x 14” Construction: 5/8" birch enclosure, dado joinery throughout Impedance: 8 ohms mono, 16 ohms when operating in stereo mode BEAUTIFULLY REFINED, HUGE GUITAR TONE   3rd Power's DREAM SERIES speaker cabinets are sonically and visually refined. They deliver a full-bodied frequency response that is well defined and in control throughout the frequency spectrum of your guitar tone. With its patented design, the DREAM SERIES 212XD is the perfect choice when you want your sound to translate in the mix with authority.   • Patented – Two internal Tri-cab™ speaker chambers eliminate standing waves • 8-ohm Mono or 16-ohm Stereo operation • 5/8" baltic birch enclosure construction • Closed-back on one chamber, open-back on the other • Horizontal & Vertical Orientation Available • Loaded with a variety of WGS or Celestion Speakers • 14" depth for extended low frequency response • Dream Series appearance with piping trim and tolex options Note: No longer available. Refined Tone With An Extra Kick The design goal for the DS212 was to capture the enormous spirit and sonic footprint of our original SB212 cab while packing it into a more streamlined enclosure. Well, we nailed it. Patented Design Crafted from 5/8" birch, the DREAM SERIES 212 features embedded triangular speaker chambers to eliminate standing waves and internal reflections. With construction features including isolated speaker chambers (one open, one closed) and a tuned triangle port, the DS212 delivers your full frequency response with a detail and punch that sounds more like a mastered record and won't get lost in the mix. *All prices are USD WARNING: Cancer and Reproductive Harm http://www.p65warnings.ca.gov Mono and Stereo Operating Modes Mono or Stereo Operating Modes The DS212 provides a ton of flexibility by way of MONO or STEREO operating modes. When you plug into the left speaker jack, both speakers are linked in mono (total 8 ohm load). When you plug into the right speaker jack you break the link and can now operate each speaker individually for stereo operation (each speaker is 16 ohms). Extended Low Frequency Response Extended Internal Dimensions With a combined internal area of ~3 cuFT, the new 14" deep DS212XD really packs a punch. That translates into an undeniably huge sound. Triangle Ported Back Panel To refine the overall performance of the cab, we brought back our open back/closed back design. This gives you the best of both worlds: punchy closed-back and a chimey open-back tones at the same time. The frequency response is extended just right: balanced when on the bridge position pickup, and with a deep punch and kick to it when in the neck position. Specifications Model Name: DS212 Power Handling: ~120w loaded with a pair of WGS Retro 30 as standard. Celestion Vintage 30 or other speakers available upon request (please note 2 weeks increased lead time for speaker procurement). Weight: 57 lbs loaded (38 lbs unloaded) Dimensions: 27.75” x 20.75” x 14” Construction: 5/8" birch enclosure, dado joinery throughout Impedance: 8 ohms mono, 16 ohms when operating in stereo mode 1307 Jewel Street Nashville, TN 37207 615-945-3393 [email protected] © 2021 3rd Power Amplification LLC. All Rights Reserved.

DREAM SERIES 412 WET/DRY/WET Multi-channel 412 Cab: Wet/Dry/Wet Setup The design goal for the DS412 was to capture the enormous spirit and sonic footprint of a full-on wet/dry/wet rig while packing it into a single streamlined enclosure. Well, we nailed it. Patented Design Crafted from 5/8" birch, the DS412 features embedded triangular speaker chambers to eliminate standing waves and internal reflections. With construction features including isolated speaker chambers (one open, three closed) and a tuned triangle port, the DS412 delivers your full frequency response with a detail and punch that sounds more like a mastered record and won't get lost in the mix. *All prices are USD WARNING: Cancer and Reproductive Harm http://www.p65warnings.ca.gov Mono, Stereo, WDW Operating Modes W/D/W, Mono, Stereo, X-pattern, 4 Channel Operating Modes X-pattern operation is totally possible. Each speaker is addressable individually, as a 412, as two separate 212s (vertical or horizontal), or in the wet/dry/wet configuration. Suggested Wet/Dry/Wet rig setup: Your dry head runs the bottom two speakers as a mono 212. Your main amp will drive the stereo FX processor. The stereo wet output from your processor will feed a stereo power amp (not included). The power amp drives the top two speakers in stereo for you wet effects sound. I recommend the dry signal be placed on the bottom as it keeps the sonic blast from blowing into the lead or BG vox on stage. Low end coupling from the stage/studio floor is usually a benefit as well. Effects are spatial enhancement and they’re going to be more effective positioned higher. Stereo spread will be more noticeable as well. Patch-bay Configurations Jack #1: 16 ohm mono cab Jack #2: 8 ohm top two speakers in mono only Jack #3: 16 ohm top right speaker only Jack #2 and #3: top speakers 16 ohms each in stereo Jack #4: 8 ohm bottom two speakers in mono only Jack #5: 16 ohm bottom right speaker only Jack #4 and #5: bottom speakers 16 ohms each in stereo Jack #2 and #4: 8 ohms top two speakers in mono, 8 ohms bottom two speakers in mono Jack #4, #2 and #3: 8 ohms mono bottom speakers, 16 ohms each top stereo speakers for WDW NOTE: To run stereo L&R only, you will need two separate amplifiers. Using the 2x 8 ohm jacks on the back of amp one, plug each into jacks #2 and #4. On amp two, again using the 2x 8 ohm jacks, plug each one into jacks #3 and #5. In essence, you’re addressing the separate speaker chambers as if they were individual cabinets. Specifications Model Name: DS412 Power Handling: ~60w per speaker loaded with a pair of WGS Retro 30 as standard. Celestion Vintage 30 or other speakers available upon request (please note 2 weeks increased lead time for speaker procurement). Weight: ~90 lbs loaded (~55 lbs unloaded) Dimensions: 30” x 30” x 14” Construction: 5/8" birch enclosure, dado joinery throughout Impedance: 16 ohm per chamber. Total impedance depends on setup Videos WDW, STEREO and QUAD 412 CAB   Here's the Wet/Dry/Wet 412 cabinet we discussed on the Tone-Talk show with Marc Huzansky and Dave Friedman. With its unique and patented triangular quad chamber design, wet/dry/wet, X-pattern, dual 212, stereo 212 (vertical or horizontal), four independent channels as well as good old straight up 412 mono operation is totally possible.   • Our internal triangular speaker chamber design eliminates standing waves • 16-ohm Mono or... • Dual 8-ohm Stereo or... • 8-ohm 212 plus two 16-ohm Stereo FX (wet/dry/wet) • 5/8" baltic birch enclosure construction • Closed-back upper chambers, single open-back chamber on the bottom • Loaded with a variety of WGS or Celestion Speakers • Custom tolex colors are available (upcharge will apply) Note: Special Order Only Multi-channel 412 Cab: Wet/Dry/Wet Setup The design goal for the DS412 was to capture the enormous spirit and sonic footprint of a full-on wet/dry/wet rig while packing it into a single streamlined enclosure. Well, we nailed it. Patented Design Crafted from 5/8" birch, the DS412 features embedded triangular speaker chambers to eliminate standing waves and internal reflections. With construction features including isolated speaker chambers (one open, three closed) and a tuned triangle port, the DS412 delivers your full frequency response with a detail and punch that sounds more like a mastered record and won't get lost in the mix. *All prices are USD WARNING: Cancer and Reproductive Harm http://www.p65warnings.ca.gov Mono, Stereo, WDW Operating Modes W/D/W, Mono, Stereo, X-pattern, 4 Channel Operating Modes X-pattern operation is totally possible. Each speaker is addressable individually, as a 412, as two separate 212s (vertical or horizontal), or in the wet/dry/wet configuration. Suggested Wet/Dry/Wet rig setup: Your dry head runs the bottom two speakers as a mono 212. Your main amp will drive the stereo FX processor. The stereo wet output from your processor will feed a stereo power amp (not included). The power amp drives the top two speakers in stereo for you wet effects sound. I recommend the dry signal be placed on the bottom as it keeps the sonic blast from blowing into the lead or BG vox on stage. Low end coupling from the stage/studio floor is usually a benefit as well. Effects are spatial enhancement and they’re going to be more effective positioned higher. Stereo spread will be more noticeable as well. Patch-bay Configurations Jack #1: 16 ohm mono cab Jack #2: 8 ohm top two speakers in mono only Jack #3: 16 ohm top right speaker only Jack #2 and #3: top speakers 16 ohms each in stereo Jack #4: 8 ohm bottom two speakers in mono only Jack #5: 16 ohm bottom right speaker only Jack #4 and #5: bottom speakers 16 ohms each in stereo Jack #2 and #4: 8 ohms top two speakers in mono, 8 ohms bottom two speakers in mono Jack #4, #2 and #3: 8 ohms mono bottom speakers, 16 ohms each top stereo speakers for WDW NOTE: To run stereo L&R only, you will need two separate amplifiers. Using

VINTAGE SERIES 112 Vintage Tone with a Balanced Response The design goal for the VS112 was to capture the spirit and attitude of vintage tweed and AC speaker cabs but with an equal string response of every note you play from low to high. Well, we nailed it. Proprietary Design Crafted from 5/8" birch, the VINTAGE SERIES 112 features a proprietary internal deflection panel to eliminate standing waves and internal reflections. With construction features including a vintage two-piece back panel design, the VS112 delivers your tone with a '60s attitude yet with modern refinement. Balanced, Vintage Mojo Extended Internal Dimensions With an internal area of 1.73 cuFT, the new VS112 boasts a 16% increase in total cubic volume compared to our original SB112 cabinet. That translates into a noticeably huge sound. Vintage Two-piece Back Panel To complete the vintage tuning of the cabinet, we looked to classic Tweed and AC amps for inspiration. We experimented with the size of the opening and the thickness of the back panel until we got exactly the response we were looking for. No matter where you play on the neck, the VS112 delivers every note with strength, clarity and tons of vintage mojo. Specifications Model Name: VS112 Power Handling: 60w loaded with a Celestion Vintage 30 as standard (other speakers are available) Weight: 37 lbs loaded (~29 lbs unloaded) Dimensions: 24” x 20.75 x 10” Construction: 5/8" birch enclosure, 1/2" birch deflection panel, dado joinery throughout Impedance: 8 ohms Videos{{ vc_btn: title=See+All+of+Our+Videos&color=orange&size=lg&align=center&i_icon_fontawesome=fa+fa-video-camera&add_icon=true&link=url%3Ahttps%253A%252F%252Fwww.youtube.com%252Fuser%252F3rdpoweramps%252F%7Ctitle%3ASee%2520All%2520of%2520Our%2520Videos%7Ctarget%3A%2520_blank }} LIVELY, CLASSIC GUITAR TONE   3rd Power's VINTAGE SERIES speaker cabinets are lively and resonant speaker cabs while still retaining an excellent balance and control of your tone. They deliver a bouncy response akin to vintage AC or Tweed combo amps but with a noticeable balance of every note, from low to high. With its vintage yet refined tone, the VS112 is the perfect choice when you want to cut through the mix with an old-school attitude.   • Proprietary FlexCAB™ speaker chamber reduces standing waves • 8-ohm Mono operation • 5/8" baltic birch enclosure construction • Vintage, open-back back panel design • Loaded with a Celestion Vintage 30 or Alnico Gold speaker • Vintage appearance with tolex options $999.00Read more Note: Current build time is running 2 - 4 weeks. Vintage Tone with a Balanced Response The design goal for the VS112 was to capture the spirit and attitude of vintage tweed and AC speaker cabs but with an equal string response of every note you play from low to high. Well, we nailed it. Proprietary Design Crafted from 5/8" birch, the VINTAGE SERIES 112 features a proprietary internal deflection panel to eliminate standing waves and internal reflections. With construction features including a vintage two-piece back panel design, the VS112 delivers your tone with a '60s attitude yet with modern refinement. Balanced, Vintage Mojo Extended Internal Dimensions With an internal area of 1.73 cuFT, the new VS112 boasts a 16% increase in total cubic volume compared to our original SB112 cabinet. That translates into a noticeably huge sound. Vintage Two-piece Back Panel To complete the vintage tuning of the cabinet, we looked to classic Tweed and AC amps for inspiration. We experimented with the size of the opening and the thickness of the back panel until we got exactly the response we were looking for. No matter where you play on the neck, the VS112 delivers every note with strength, clarity and tons of vintage mojo. Specifications Model Name: VS112 Power Handling: 60w loaded with a Celestion Vintage 30 as standard (other speakers are available) Weight: 37 lbs loaded (~29 lbs unloaded) Dimensions: 24” x 20.75 x 10” Construction: 5/8" birch enclosure, 1/2" birch deflection panel, dado joinery throughout Impedance: 8 ohms Videos{{ vc_btn: title=See+All+of+Our+Videos&color=orange&size=lg&align=center&i_icon_fontawesome=fa+fa-video-camera&add_icon=true&link=url%3Ahttps%253A%252F%252Fwww.youtube.com%252Fuser%252F3rdpoweramps%252F%7Ctitle%3ASee%2520All%2520of%2520Our%2520Videos%7Ctarget%3A%2520_blank }}Home DRAGON SERIES DRAGON 100 DRAGON 45 DRAGON 25 DG412 CAB DG212 CAB DG112 CAB 1307 Jewel Street Nashville, TN 37207 615-945-3393 [email protected] © 2016 3rd Power Amplification LLC. All Rights Reserved.

VINTAGE SERIES 212 Vintage Tone With a Kick The design goal for the VS212 was to capture the spirit and attitude of vintage tweed and AC speaker cabs but with an equal string response of every note you play from low to high. Well, we nailed it. Proprietary Design Crafted from 5/8" birch, the VINTAGE SERIES 212 features a patented internal triangular chamber to eliminate standing waves and internal reflections. With construction features including a vintage two-piece back panel design, the VS212 delivers your tone with a '60s attitude with a refined, punchy low end. Balanced, Vintage Mojo Extended Internal Dimensions With an internal area of 2.25 cuFT, the new VS212 really packs a punch. That translates into a noticeably large sonic footprint. Vintage Two-piece Back Panel To complete the vintage tuning of the cabinet, we looked to classic Tweed and AC amps for inspiration. We experimented with the size of the opening and the thickness of the back panel until we got exactly the response we were looking for. No matter where you play on the neck, the VS212 delivers every note with strength, clarity and fat "woody" kick to it. Specifications Model Name: VS212 Power Handling: 60w loaded with a Vintage 30 & G12H30 Anniv. as standard (other speakers are available) Weight: 53 lbs loaded (34 lbs unloaded) Dimensions: 27.75” x 20.75 x 10.5” Construction: 5/8" birch enclosure, 1/2" birch internal chamber, dado joinery throughout Impedance: 8 ohms Videos{{ vc_btn: title=See+All+of+Our+Videos&color=orange&size=lg&align=center&i_icon_fontawesome=fa+fa-video-camera&add_icon=true&link=url%3Ahttps%253A%252F%252Fwww.youtube.com%252Fuser%252F3rdpoweramps%252F%7Ctitle%3ASee%2520All%2520of%2520Our%2520Videos%7Ctarget%3A%2520_blank }} PUNCHY, CLASSIC GUITAR TONE   3rd Power's VINTAGE SERIES speaker cabinets are lively and resonant speaker cabs while still retaining an excellent balance and control of your tone. They deliver a bouncy response akin to vintage AC or Tweed combo amps. With its vintage yet refined tone, the VS212 is the perfect choice when you want to cut through the mix with an old-school attitude with a punchy bottom end.   • Patented – Internal Tri-cab™ speaker chamber eliminates standing waves • 8-ohm Mono operation • 5/8" baltic birch enclosure construction • Vintage, open-back back panel design • Loaded with a variety of Celestion Speakers • Vintage appearance with tolex options $1,299.00Read more Note: Current build time is running 2 - 4 weeks. Vintage Tone With a Kick The design goal for the VS212 was to capture the spirit and attitude of vintage tweed and AC speaker cabs but with an equal string response of every note you play from low to high. Well, we nailed it. Proprietary Design Crafted from 5/8" birch, the VINTAGE SERIES 212 features a patented internal triangular chamber to eliminate standing waves and internal reflections. With construction features including a vintage two-piece back panel design, the VS212 delivers your tone with a '60s attitude with a refined, punchy low end. Balanced, Vintage Mojo Extended Internal Dimensions With an internal area of 2.25 cuFT, the new VS212 really packs a punch. That translates into a noticeably large sonic footprint. Vintage Two-piece Back Panel To complete the vintage tuning of the cabinet, we looked to classic Tweed and AC amps for inspiration. We experimented with the size of the opening and the thickness of the back panel until we got exactly the response we were looking for. No matter where you play on the neck, the VS212 delivers every note with strength, clarity and fat "woody" kick to it. Specifications Model Name: VS212 Power Handling: 60w loaded with a Vintage 30 & G12H30 Anniv. as standard (other speakers are available) Weight: 53 lbs loaded (34 lbs unloaded) Dimensions: 27.75” x 20.75 x 10.5” Construction: 5/8" birch enclosure, 1/2" birch internal chamber, dado joinery throughout Impedance: 8 ohms Videos{{ vc_btn: title=See+All+of+Our+Videos&color=orange&size=lg&align=center&i_icon_fontawesome=fa+fa-video-camera&add_icon=true&link=url%3Ahttps%253A%252F%252Fwww.youtube.com%252Fuser%252F3rdpoweramps%252F%7Ctitle%3ASee%2520All%2520of%2520Our%2520Videos%7Ctarget%3A%2520_blank }}Home DRAGON SERIES DRAGON 100 DRAGON 45 DRAGON 25 DG412 CAB DG212 CAB DG112 CAB 1307 Jewel Street Nashville, TN 37207 615-945-3393 [email protected] © 2016 3rd Power Amplification LLC. All Rights Reserved.