DREAM WEAVER MKII

Optional Reverb
112 Combo Version

Inspired by our favorite vintage amplifiers, the Dream Weaver MKII features classic American tones on channel one and a rich, organic Plexi experience on channel two.

The input section features two jacks that allow you to either run both channels combined, or run each channel individually.

American Channel
The extended range of the Middle control now comes to the Dream Weaver MKII courtesy of our very own Wooly Coats Spanky EQ circuitry. Tone and temperament of this channel is set via Volume, Treble, Middle and Bass controls to deliver an authentic blackface combo amp experience with an excellent balance of rich tone, punch and clarity. Push the midrange control past noon and you take this channel into a superb tweed growl.

PLEXI Channel
The DREAM WEAVER MKII’s dual 12AX7 preamp and tone stack circuitry featuring Volume, Treble, Middle and Bass controls faithfully deliver an authentic plexi experience that leans toward an early ’68 plexi with its full-bodied frequency response, organic saturation and rich overtones. More signal gain can be added to the audio path via toggle switch to push your tone over the top.

Tube or Solid State Rectification
For the ultimate experience in the “feel” department, the Dream Weaver MKII gives you two rectifier options that are controlled via toggle switch. Choose between a tube rectifier (classic vintage power supply sag) or a solid-state rectifier (efficient, clear and punchy) and easily toggle between whichever you prefer.

HybridMASTER™ Volume Control
HybridMASTER™ and the Venue Switch are located on the front panel giving you the confidence to play what you feel when you feel it at exactly the volume you need for the occasion. Think of the Venue Switch as a “macro” volume adjustment – choose between full volume (Stage Mode) or an 70% volume reduction (Studio Mode) – and the HybridMASTER knob as a “micro” volume adjustment allowing you to fine tune your output levels. Our patented HybridMASTER is volume management executed to perfection.

Model Name: Dream Weaver MKII
Power: Class AB, 35 Watts (tube rectified), ~40 Watts (solid state rectified)
Power Tubes: Mullard Reissue EL34 x 2 as standard
Preamp Tubes: V1 -V3: ECC83S, V4: Sovtek 12AX7 LPS
American Channel Controls: Volume, Treble, Middle and Bass
Plexi Channel Controls: Volume, Gain Boost Switch, Treble, Middle, Bass
Other Controls & Features: Presence, HybridMASTER™ Level Control for Fine Tuning Output Level, Citizen Loop (tube-buffered pedal optimized series FX loop from the Dual Citizen).
Options: Dual Mode Tube-driven Spring Reverb, 112 Combo Version
Weight: 29 lbs.
Case Composition: 5/8″ Birch
Speaker Outputs: 1 x 16, 2 x 8 and 2 x 4 Ohm Speaker Outputs
Dimensions: Head: 24″ x 10.5″ x 9.33″
112 Combo: 25″ x 20.75″ x 11″
Operating Voltage: 120V is standard. Export 240V and other mains voltages are available
Standby Switch Features: Middle Position: Standby Mode, Up Position: Rectifier 1, Down Position: Rectifier 2
Rectifiers: Tube and Solid-State power supply rectification selectable via the Standby Switch
Certification: CE Certified

AMERICAN & BRITISH TONES TOGETHER IN ONE AMP

 

Although no longer in regular production, 3P Legacy amplifiers can be special ordered as a custom build. If Alladin had wished for one amp that could deliver American clean and British crunch tones, the Genie would have snapped his fingers and made the DREAM WEAVER MKII appear. It possesses the soul and fire of these legendary vintage amplifiers but now with modern features and a refreshing design.

• CH.1 American voiced
• CH. 2 ’68 Plexi “super lead” w/ Gain Switch
• Patented HybridMASTER™ volume management
• Tube Buffered, Pedal Optimized Series FX Loop
• Presence control
• Switchable Tube & Solid-State Rectifier Modes
• Illuminating backlit logo
• 2 x EL34 power tubes, up to 40W
• 16, 8 and 4 ohm speaker outputs
• Optional tube-driven Spring Reverb
• Head or 112 Combo Available

Inspired by our favorite vintage amplifiers, the Dream Weaver MKII features classic American tones on channel one and a rich, organic Plexi experience on channel two.

The input section features two jacks that allow you to either run both channels combined, or run each channel individually.

American Channel
The extended range of the Middle control now comes to the Dream Weaver MKII courtesy of our very own Wooly Coats Spanky EQ circuitry. Tone and temperament of this channel is set via Volume, Treble, Middle and Bass controls to deliver an authentic blackface combo amp experience with an excellent balance of rich tone, punch and clarity. Push the midrange control past noon and you take this channel into a superb tweed growl.

PLEXI Channel
The DREAM WEAVER MKII’s dual 12AX7 preamp and tone stack circuitry featuring Volume, Treble, Middle and Bass controls faithfully deliver an authentic plexi experience that leans toward an early ’68 plexi with its full-bodied frequency response, organic saturation and rich overtones. More signal gain can be added to the audio path via toggle switch to push your tone over the top.

Tube or Solid State Rectification
For the ultimate experience in the “feel” department, the Dream Weaver MKII gives you two rectifier options that are controlled via toggle switch. Choose between a tube rectifier (classic vintage power supply sag) or a solid-state rectifier (efficient, clear and punchy) and easily toggle between whichever you prefer.

HybridMASTER™ Volume Control
HybridMASTER™ and the Venue Switch are located on the front panel giving you the confidence to play what you feel when you feel it at exactly the volume you need for the occasion. Think of the Venue Switch as a “macro” volume adjustment – choose between full volume (Stage Mode) or an 70% volume reduction (Studio Mode) – and the HybridMASTER knob as a “micro” volume adjustment allowing you to fine tune your output levels. Our patented HybridMASTER is volume management executed to perfection.

Model Name: Dream Weaver MKII
Power: Class AB, 35 Watts (tube rectified), ~40 Watts (solid state rectified)
Power Tubes: Mullard Reissue EL34 x 2 as standard
Preamp Tubes: V1 -V3: ECC83S, V4: Sovtek 12AX7 LPS
American Channel Controls: Volume, Treble and Bass
Plexi Channel Controls: Volume, Gain Boost Switch, Treble, Middle, Bass
Other Controls & Features: Presence, HybridMASTER™ Level Control for Fine Tuning Output Level, Citizen Loop (tube-buffered pedal optimized series FX loop from the Dual Citizen).
Options: Dual Mode Tube-driven Spring Reverb, 112 Combo Version
Weight: 29 lbs.
Case Composition: 5/8″ Birch
Speaker Outputs: 1 x 16, 2 x 8 and 2 x 4 Ohm Speaker Outputs
Dimensions: Head: 24″ x 10.5″ x 9.33″
112 Combo: 25″ x 20.75″ x 11″
Operating Voltage: 120V is standard. Export 240V and other mains voltages are available
Standby Switch Features: Middle Position: Standby Mode, Up Position: Rectifier 1, Down Position: Rectifier 2
Rectifier Tube Sockets: Two Rectifier Tube Sockets: Socket 1 Loaded with Solid State Retifier Plug, Socket 2 Loaded with GZ34 Rectifier Tube
Certification: CE Certified

1307 Jewel Street
Nashville, TN 37207
615-945-3393
[email protected]

© 2016 3rd Power Amplification LLC. All Rights Reserved.